How Do You Purify Water in the Wild?
How do you purify water in the wild? It is a question that all of us need to consider when we do outdoor activities. In outdoor activities, water is a significant provider of our life. However, unclean water often carries some pathogenic substances, such as dysentery, typhoid fever, schistosomiasis, liver leeches, cholera, and other toxic germs; as well as decaying stems and leaves, carcasses, and feces of insects, birds, and animals; Some may also carry heavy metal salts or toxic minerals. Therefore, when you find a water source when you are extremely thirsty, it is best not to rush to drink, and you should carry out the necessary purification and disinfection treatment of the water source according to the environmental conditions to avoid poisoning or infection with diseases due to drinking water. There are 2 ways to purify and disinfect the water sources for you.
1. By infiltration to purify water in the wild
Infiltration is a good and money-saving method to the question of how do you purify water in the wild. When you find a water source with floating foreign bodies or turbid water quality, you can dig a pit about 50 to 80 cm deep and about 1 meter in diameter at 3 to 5 meters from the water source, so that the water can naturally seep out from the gaps in the sand, stone, and soil; Then, gently remove the oozing water and put it into a water storage container such as a box or pot, taking care not to stir up the sediment at the bottom of the pit and keep the water clean.
2. By precipitation to purify water in the wild
When you find a water source with sediment, turbidity, foreign bodies floating and microorganisms or worms and leech larvae, etc., and the environment around the water source is not suitable for digging pits, you can find a plastic bag. Plastic bags of good quality that are not easy to break are needed. Stick a few small holes in the bottom, or use cotton single gloves, handkerchiefs, socks, sleeves, etc., or you can use a Coke bottle, remove the bottom of the bottle and put it upside down, and then use a knife to prick the bottle cap out of a few small holes; Then, from bottom to top, fill in 2 to 4 cm thick soilless clean fine sand, charcoal powder, fine sand, charcoal powder, fine sand, a total of 5 to 7 layers, pressed tightly. Slowly pour unclean water into a homemade simple filter, and when there is water overflowing under the filter, you can collect the filtered clean water with a basin or kettle. If you are not satisfied with the filtered water quality, you should make another simple filter to filter the filtered water again, until you can be satisfied. Precipitation is a little difficult to operate because we can not always find the things to do the precipitation. So it is not the best answer to how do you filter water in the wild.
Neither of these above methods is very simple, and here I recommend a personal water filter without these complicated operations. The personal water filter is small and effective, and it can filter out drinkable pure water from a turbid liquid.
How to use lifestraw personal water filter to purify water in the wild？
A personal water filter is a straw device that obtains drinking water and can filter 1500 liters of water, enough for one person to use for a year. The personal water filter is enough to effectively remove 99.9% of E. coli, Legionella and other common pathogenic bacteria in the water, soften the water quality, remove heavy metal ions in the water, and fully remove VOC, residual chlorine, and other organic pollutants, improve the taste. The personal water filter is a safe drinking water filter for field operations, cooking outings, emergency rescue, earthquake floods, and other situations.
When first used, rinse the filter element of the personal water filter with water and the floating dust in the tube hole three to four times before normal use. Here are some using methods of the personal water filter.
Method 1: Put one end of the inlet nozzle of the miniature water purification straw into the water source, and directly suck until the water comes out.
Method 2: If it is far from the water source, the extension pipe and the pre-filter element can be connected to the inlet nozzle and then operated.
Method 3: If the water source is turbid, the pre-filter element can be connected to the inlet nozzle before operation.
Method 4: First in the folding water bag (or some specific beverage bottles can also be, such as Coke bottles) after loading the water source water, connected to the water inlet nozzle, and then by squeezing the water bag or beverage bottle, directly drink at the drinking fountain nozzle.
How long does a lifestraw personal water filter last?
After getting the answer to how do you filter water in the wild and the using methods of the Lifestraw personal water filter. Let’s move to the answer to how long does a personal water filter last. It depends on many factors. Includes the type of filter you use, the number of contaminants in the water, the hardness of the water, the frequency of use, and other factors.
The product of the personal water filter will provide documentation that gives clear instructions on how often to replace the filter in the personal water filtration system. Some personal water filtration systems have indicators that will provide a warning that the filter needs to be replaced. In general, many personal water filters are used continuously for 6-12 months before they need to be replaced.
In conclusion, when we are in the wild, it is better to bring a personal water filter with us to help us solve the question of how do you purify water in the wild. The personal water filter is cheap and easy to bring and use, as well as having a long service life. Come and get your personal water filter from our website.